Servo Presser da Manyan sassan injin mai
KST-660 servo quantitative bawul manyan abubuwan haɗin gwiwa: wurin daidaitawa, layin dogo, motar servo, ɗakin mai ƙididdigewa, madaidaicin piston mai ƙididdigewa, ƙananan bawul ɗin jikin bawul, piston silinda, da bututu mai.
| Halin da ake ciki | 0.05cc-20cc |
| Daidaitawa | ± 1% -2% |
| Allowance | NLGI # 00- # 3 |
| Matsa lamba mai dacewa | 6-120kg / cm2 |
| Bukatar hawan iska | 0.4 ~ 0.6MPa |
| Nauyi | 3kg |
| Girman | 45*90*380mm |
| Yanayin yanayin aiki | -10 °C ~ + 50 °C |
1. Samfurin yana daidai da ƙima.
2. Ƙwararren sarrafawa kai tsaye yana saita adadin mai don keɓance matakin daidaitawa na hannu.
3. Za'a iya adana umarnin kai tsaye da kuma wayoyi masu sarrafawa.
4. Zai iya saita man tofa don tofa daidai gwargwado.
5. Tare da juriya.Kawar da zubewa, ambaliya, goga da sauran abubuwan mamaki.
6. Za a iya sanye take da replenishment, tofa, tabbatar da dubawa na inductor, da retentate sakamako.
7. Dangane da ainihin halin da ake ciki, ana iya daidaita shi ta ƙungiyoyi masu yawa na kafaffen ramin matsayi.
8. Ana iya shafawa NLGI # 00- # 3 man shafawa, Semi-solid, high viscosity, ruwa, da makamantansu.
Babban abubuwan da ke cikin bawul ɗin ƙididdigewa na KST: daidaita wurin zama, tafki mai ƙididdigewa, daidaitaccen piston mai ƙididdigewa, ƙananan bawul ɗin bawul, piston silinda, da bututun mai.
| abin koyi | KST-701 | KST-150 | KST-550 | KST-033 |
| Lokaci | 0.007cc-0.1cc | 0.05cc-1cc | 0.5cc-5cc | 3cc-30c |
| Daidaitawa | ± 1% -3% | ± 1% -2% | ||
| Allowance | NLGI#00-#3 | |||
| Matsi mai dacewa | 6-50kg/cm² | 6-100kg/cm² | ||
| Bukatar hawan iska | 0.4 ~ 0.6MPA | |||
| nauyi | 0.5kg | 1.3kg | 1.6kg | 2.3kg |
| Girma mm | 28*28*108 | 38*46*225 | 45*56*230 | 48*58*265 |
| yanayin aiki | -10-+50 ℃ | |||
1. An ƙididdige samfurin, kuma akwai nau'o'in salo da za a zaɓa daga.
2. Tare da juriya.Kawar da zubewa, ambaliya, goga da sauran abubuwan mamaki.
3. Za a iya sanye shi da sake cikawa, tofa mai tabbatar da mai nuna alama tare da tabo.
4. Bisa ga ainihin halin da ake ciki, shi za a iya daidaita ta da mahara kungiyoyin na kafaffen rami matsayi.
5. Za a iya shafa NLGI # 00- # 3 mai, Semi-solid, high viscosity, ruwa, da makamantansu.
Amfani:
1. A kwance, allura kai tsaye don canza bututun ƙarfe.
2. Giciye SPRAY da dogon sanda ≤1000mm tsayi iya zama sabani.
Filin aikace-aikace:
NLGI # 00- # 3 man shanu, Semi-m, babban danko, ruwa.
| abin koyi | KST-810P |
| Lokaci | sarrafa lokaci |
| Daidaitawa | ± 10% |
| Mai dacewa | NLGI # 00- # 3 mai |
| yanayin aiki | -10 ° C - + 50 ° C |
| Matsi mai dacewa | 6-120kg / cm2 |
| Bukatar hawan iska | 0.4-0.6MPa |
| nauyi | 0.5kg |
| Girman | 30mm * 30mm * 150mm |
Amfani:
1. Za a iya ba da girma dabam dabam.
2. Daidaitawar raster na iya samun sauƙin sarrafawa na adadin manne (man).
3. Ana iya amfani dashi don daidaitawa hex gyara sukurori da kuma gyarawabinne goro.
4. Ana iya zaɓar gano allura tare da daidaitawar grating.
| Matsakaicin matsi | 100 bar |
| Min matsa lamba | 6 bar |
| Yawanci | 200 a sakan daya |
| Girma | 142mm*58*15mm (Mafi tsayi) 125mm*58mm*15mm (Mafi Gajewa) |
| abin koyi | KST-610 |
| Halaye | Gwada aiki, gano aikace-aikacen |
| Matsin aiki | Har zuwa 180kg / cm2 |
| aikace-aikace | Mai ruwa, manne mara ƙarfi |
| Bukatar hawan iska | 0.4-0.6MPa |
| girman jiki | 30mm * 30mm * 175mm |
